Description
Description
This listing is for the exact recycled plastic top you will receive. Please note that the steel legs pictured may not be the exact ones you will receive, however they will be the same design.
NOTE THIS ITEM IS MADE TO ORDER. Delivery is 4-6 weeks, if you need it sooner please contact us.
Our table tops have a mostly smooth satin surface, however, please be aware there may be some surface irregularities such as:
- Dips, where an air pocket became trapped as the plastic was being pressed
- Shallow ‘cracks’, where the different colours have met during the layering process
- Shiny spots, from minute changes in temperature
- ‘Growth rings’ (slight change in surface texture, alternating between shiny and satin), which show each pull on the handle of the hydraulic press as the piece was being pressed into the mould
These are all part of the handmade process, and add character to each piece!
Please note that due to the nature of recycling used plastic, our products may contain fabric fibres, splinters and the occasional piece of glitter, despite every effort being made to remove them. These come from the garments/products which the plastic bags originally contained when they were single-use packaging.
The Weez & Merl logo (WM) and the recycling symbol for LDPE (♻4) feature debossed on the reverse of the table top. The Thomas Gontar (TG) logo features stamped into the bottom of one of the steel legs.
Due to the nature of forging by hand, and the use of recycled steel, the colour, texture and rivets will vary slightly: each piece is subtly unique.
If you would like to commission us for a piece, we may be able to create something for you – please get in touch.
Dimensions
- Total dimensions: (H) 600 x (W) 470 x (D) 470 mm
- Steel Leg dimensions: (H) 575 x (W) 470 x (D) 470mm
- Plastic Top dimensions: (Ø ) 450 x (H) 28 mm
- ADDITIONAL MEASUREMENTS:
- Leg tapers (bottom – top): (W&D) 30 – 18 mm
- Leg length: (H) 535 mm
- Mounting ring: (Ø) 370 x (H) 40 mm
- Weight: 15.00 kg
- KEY: H – Height W – Width D – Depth Ø – Diameter
- Please allow +/- 5 mm variance on all dimensions.
Table Care
RECYCLED PLASTIC TABLE TOP
The density of polyethylene is similar to that of a hardwood such as Oak, so it will scratch and mark if care is not observed. Do not use abrasive materials to scrub the tops, it is advised to use a damp wet cloth, or the soft side of a sponge. Cleaning products can be used on the plastic, however please note that differing care is required for the legs, as described below.
We do not recommend that our products are exposed to temperatures exceeding 100° Celsius (212°F) as warping may occur. Temperatures higher than 150-160° Celsius (302-320F) will melt the plastic.
RECYCLED STEEL LEGS
The recycled steel legs will eventually rust if exposed to water or damp conditions, so please take care to keep them dry.
The legs are finished with a Renaissance wax coating. It is advised to reseal every 12 months.
Wipe with dry cotton cloth, do not use cleaning products as this may remove the protective wax coating.
UK Delivery
NOTE THIS ITEM IS MADE TO ORDER.
Delivery is 4-6 weeks, if you need it sooner please contact us. Delivery will by my Royal Mail 1st Class tracked.
International Delivery
If you are interested in purchasing this piece from outside of the UK, please contact us directly and we’ll be happy to see if it is possible, and to provide you with a quote as shipping cost vary enormously for international delivery.
Please also be aware that you may have to pay customs charges upon the arrival of the piece. Please anticipate these fees.















